Benninger Super Tronik
Pos: 0912
Sectional Warper BENINGER SUPER TRONIK Width 3400mm year 1994 with gatta position 600
 |
 |
 |
 |
 |
Bruckner Stenter
Pos: 0812
1 STENTER AND HEATSETTING FRAME MAKE BRÜCKNER YEAR 2005 type VN SFP 20/8 -999, roller width 2000 mm, fabric width 1800 mm, 8 chambers gas heating , with the following configuration
 |
 |
 |
 |
 |
Osthoff
Pos: 0712
Osthoff Siging -Desizing Machine Year 1994, working width 2000 mm, complete revision 2007
 |
 |
 |
 |
 |
HT Machines
Pos: 0612
6 High Temperature Machines
2 Machines Make: Fungs year 2008, 300kg
2 Machines Make: Then, year 2001, 300kg
2 Machines Make: Thies, year 2001, 300kg
 |
 |
 |
 |
 |
 |
 |
Stenter 1800mm
Pos: 0212
Stenter Monforts with cotting head, make stork, year 2008, with rotation rakel, stenter is with 2 chambers, with thermo oil heating
 |
 |
 |
 |
 |
Stenter 3200 mm
Pos: 0412
Stenter Monforts TYP: Montex 5000, Year 2003, with 4 chambers, width 3200mm, with Malo, with 3 chambers Finewashingmachine make Kusters, Thermo Oil heating, only needle
 |
 |
 |
 |
 |
Stenter 2400 mm
Pos: 0312
Stenter Monforts TYP: Montex 5000, Year 2003, with 6 chambers, width 2400mm, with Malo, with 4 chambers Finewashingmachine make Kusters, Thermo Oil heating, needle
 |
 |
 |
 |
 |
MOERS- DECAPIZING
POS: 3011
VAPERMAR-STANDART-DUPLEX 1500, WORKING PRESSURE: -1/2 BAR, WORKING TEMPERATURE: 133°C, VOLUME: 3.900 LITER, YOC: 1999, NUMBER OF MACHINES: 2
 |
 |
 |
 |
 |
SUEDING MACHINE XETMA GEMATEX
POS: 3111
TYP: MULTISYSTEM XRBE, YOC: 2002, WORKING WIDTH: 2.200 MM, FABRIC SPEED: 5-60 M/MIN, IN OPTION WITH "SUEDING" TAMBOUR SPEED "0" (TAMBOUR FIXED, MACHINE IS EQUIPED WITH SUEDING ROLLERS / (CONVERSION TO RAISING ROLLER POSSIBLE), MACHINE SPEED USING RAISING ROLLERS: -50 - +50 M/MIN; RAISING WITH THE HAIR: -50 -+50 M/MIN, USING SUEDING ROLLERS RAISING WITH THE HAIR: -200 - +200 M/MIN, RAISING AGAINST THE HAIR: -200 - +200 M/MIN, CONTROLED BY: PC
 |
 |
MARIA CROSTA SPT 6
POS: 3211
MARIA CROSTA SPT 6 CARBON CYLINDER
YOC: 2006, ELECTRONICS: 400V / 50 HZ / 81 KW, BARREL WIDTH: 2.400MM
 |
 |
 |
 |
 |
SANTEX SANTASHRINK JUMBO
POS: 3411
SANTEX SANTASHRINK JUMBO BK/200 GAS IR
YOC: 1990, GENERAL OVERHAUL: 2001, HEATING: GAS, NATURAL GAS, BARREL WIDTH: 2.100MM, WORK WIDTH: 2.000MM
 |
 |
 |
THEN OFHT
POS: 3511
8 PIECE HEATING: HOT WATER (10 BAR, 185°C), WORKING TEMPERATURE: 152°C, WORKING PRESSURE: 4 BAR, HEATING EXCHANGER WITH " CIRCULATION DEVICES: 1X HEATING (HOT WATER) 1X COOLING (COLD WATER), YOC: 5X 1995 3X 1998
 |
THIES TUMBLER
POS: 2911
ROTO-TUMBLER 140/F2, YOC: 1999, NO. OF CHANNELS: 2, CLOTH CAPACITY: 280 KG, WORKING TEMPERATURE: 140° , WORKING PRESURE: 3,5 BAR, HEAT EXCHANGER WITH " CIRCULATION DEVICES: 1X HEATING (STEAM) 1X COOLING (COLD WATER), CONTROLED BY: BARCO SEDOMAT 3500, TANKS WITH HEATER AND MIXER: 1X CA. 500 LITER
 |
 |
 |
 |
